loading nk.bin

Jul 10, 2008 at 9:18 PM
Hi All,
  I am trying to load the nk.bin file from a CF card.  I have the bootloader installed, but when I tell the bootloader to load from CF it says failed to detect or initialize device.  Is this a hardware word issue or a possible hardware problem?

Thanks in advance.
harold
Jul 13, 2008 at 12:19 PM
Edited Jul 13, 2008 at 12:22 PM
You don't want to "download device - CF", you want "Startup:- Launch CF resident image".
I suspect you are using bootloader menu item 6 when you should be using 5.

If this is not the problem, post your configuration and what you are using for a hardwrae word.


DV
Jul 14, 2008 at 2:36 AM
Hey,
  Thanks for the reply.  It looks like that did it, I can't tell yet because I am unable to connect over ethernet using the cerHostIP app.  In the terminal window it does say that CE did launch.  I will have access to a different router tomorrow and hopefully I will get it to work then.  Thanks for the support.

harold