Cannot Get ActiveSync to Recognize Device

Nov 28, 2009 at 12:02 AM

Cannot connect to ActiveSync 4.5 (AS45).

AS45 on this machine *will* recognize a cradled motorola MC3090 handheld

AS45 on this machine will *NOT* recognize the verdex

AS45 on my other machine *will* recognize a cradled motorola MC3090 handheld

AS45 on my other machine will *NOT* recognize the verdex

However, both machines recognized that there was "something there" and installed drivers.

Does the stuff in red/bold below make any difference?

What am I missing? 

******************** BOOT SCREEN *************************

Microsoft Windows CE Bootloader Common Library Version 1.4 Built Oct  1 2008 11:
Hardware or Power-on Reset
For GumstixIII Verdex Platform  1.4 Built Oct  1 2008 11:28:38
PLATFORM INFO: XL6 Verdex @624Mhz
RAM INFO:Size 134217728
FLASH INFO:Size 33423360
FLASH INFO:Bytes per blocks: 131072 Number of blocks: 255
FLASH INFO:Sectors per blocks: 256 Data bytes per sector: 512
Serial number: 880B01BF49315368
Persistent registry support enabled.
Configuring ConsoleLCD16...Configured w/USB client.
Configuring netPro...LAN9118: Chip Id 117 Revision 2
Auto Negotiation done
LAN9117 Mac = 00-12-33-55-CC-AA
Configured wo/WiFi.
Configuring SD...Configured SD.
XL6PRO platform Configured!

Press [ENTER] to launch image stored on SD/MMC or [SPACE] to cancel.

Initiating image launch in 2 seconds.

Boot Loader Configuration:

0) IP configuration:            DHCP
1) SMSC MAC address:            00-12-33-55-CC-AA
2) USB RNDIS MAC address:       00-00-00-00-00-00
3) Boot delay:                  3 seconds
4) Hardware configuration:      0xC000D026
5) Startup:                     Launch SD/MMC resident image
6) Download device:             STUART
7) Download baud rate:          115200
8) Reset default configuration
9) Edit memory
C) Clean registry boot:         NO
U) Unlock boot blocks
R) Reset
S) Store and lock configuration/boot blocks
D) Download image now
L) Launch SD/MMC resident image now

Enter your selection:


******************** EQUIPMENT *****************************

Bought the LCD Pro Pack. I can boot the device with the default NK.BIN. This file is 15,836,667 bytes in sized and dated Nov 10, 2008. The boxes they came in say

verdex PRO XL6P




Nov 28, 2009 at 9:49 PM

I don't remember all the details off hand but you might try setting an USB RNDIS mac address (anything will do).